config.inc.php 程式修改

1. 修改區塊模組設定週期為第 1 節至第 E 節，而非 period 1 ...等，且固定區域顯示格式為 select，area_list_format = "select"。

   [root@moodle mod_tmp]# diff -urNwbBE mrbs/web/config.inc.php ../blocks/mrbs/web/config.inc.php
   --- mrbs/web/config.inc.php	2012-10-21 19:24:42.000000000 +0800
   +++ ../blocks/mrbs/web/config.inc.php	2013-02-25 13:15:17.000000000 +0800
   @@ -106,18 +106,21 @@
    // Moodle HACK
    
    if (!isset($cfg_mrbs->periods) or empty($cfg_mrbs->periods)) {
   -    $periods[] = "Period 1";
   -    $periods[] = "Period 2";
   -    $periods[] = "Period 3";
   -    $periods[] = "Period 4";
   -    $periods[] = "Period 5";
   -    $periods[] = "Period 6";
   -    $periods[] = "Period 7";
   -    $periods[] = "Period 8";
   -    $periods[] = "Period 9";
   -    $periods[] = "Period 10";
   -    $periods[] = "Period 11";
   -    $periods[] = "Period 12";
   +    $periods[] = "第1節";
   +    $periods[] = "第2節";
   +    $periods[] = "第3節";
   +    $periods[] = "第4節";
   +    $periods[] = "中午";
   +    $periods[] = "第5節";
   +    $periods[] = "第6節";
   +    $periods[] = "第7節";
   +    $periods[] = "第8節";
   +    $periods[] = "第9節";
   +    $periods[] = "第A節";
   +    $periods[] = "第B節";
   +    $periods[] = "第C節";
   +    $periods[] = "第D節";
   +    $periods[] = "第E節";
    } else {
        $pds = explode("\n", $cfg_mrbs->periods);
        foreach ($pds as $pd) {
   @@ -156,7 +159,8 @@
    //$refresh_rate = $cfg_mrbs->refresh_rate;
    
    # should areas be shown as a list or a drop-down select box?
   -$area_list_format = $cfg_mrbs->area_list_format;
   +$area_list_format = "select";
    
    # Entries in monthly view can be shown as start/end slot, brief description or
    # both. Set to "description" for brief description, "slot" for time slot and
   

2. 課表若以「時間」顯示，表格會出現 8:00, 9:00 等每小時一格方式顯示。但這不符合學校課表作息，修改成以「週期」顯示後，雖然不會出現時間訊息，但課表匯入時還是必須符合週期時間。也就是每天第一週期的起始、最後一週期結束時間、每一週期時間間隔，此設定在程式 web/week.php，以下設定為起始及結束時間皆為 12:00，以「分」為間隔，故可以有 60 個週期，並以 0 分開始。

   [root@moodle mrbs]# grep '$format = \"Gi\"' web/week.php -A8
   $format = "Gi";
   if( $enable_periods ) {
       $format = "i";
       $resolution = 60;
       $morningstarts = 12;
       $morningstarts_minutes = 0;
       $eveningends = 12;
       $eveningends_minutes = count($periods)-1;
   }
   .....
   .....
   // Define the start and end of each day of the week in a way which is not
   // affected by daylight saving...
   for ($j = 0; $j<=($num_of_days-1); $j++) {
       // are we entering or leaving daylight saving
       // dst_change:
       // -1 => no change
       //  0 => entering DST
       //  1 => leaving DST
       $dst_change[$j] = is_dst($month,$day+$j,$year);
       $am7[$j]=mktime($morningstarts,$morningstarts_minutes,0,$month,$day+$j,$year,is_dst($month,$day+$j,$year,$morningstarts));
       $pm7[$j]=mktime($eveningends,$eveningends_minutes,0,$month,$day+$j,$year,is_dst($month,$day+$j,$year,$eveningends));
   }